ZyXEL Communications 480 manual Default Dial-in Setup Fields

Prestige 480 Dual BRI ISDN Router

8.3Default Dial-in Setup

This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from both remote dial-in users, and remote nodes until authentication is completed. Once authentication is completed and if it matches a remote node, your Prestige will use parameters fromthat particular remote

	Menu 13 - Default Dial -in Setup
Telco Options:		IP Address Supplied By:
CLID Authen= None		Dial-in User= Yes
		IP Pool= No
PPP Options:		IP Start Addr= 192.168.129.1
Recv Authen= CHAP/PAP		IP Count(1,4)= 2
Compression= Yes
Mutual Authen=	No
O/G Login= 3		Session Options:
O/G Password=	****	Edit Filter Sets= No

Multiple Link Options:

Max Trans Rate= 256

Callback Budget Management:

Allocated Budget(min)=

Period(hr)=

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

node.

Figure 8-3 Menu 13 – Default Dial-in Setup

From the Main Menu, enter 13 to go to Menu 13 – Default Dial-in Setup. This section describes how to configure the protocol-independent fields in this menu. For the protocol-dependent fields, refer to the appropriate chapters.

The table below describes and contains information on how to configure each parameter in Menu 13 –

Default Dial-in Setup.

Table 8-2 Default Dial-in Setup Fields

Field

Description

Option

8-4 Dial-In Server Configuration