ZyXEL Communications 480 manual Bridge Static Route Menu Fields, Field Description

Prestige 480 Dual BRI ISDN Router

The following table describes the Bridge Static Route Menu.

	Bridge Static Route Menu Fields
Field	Description
Route Name	Enter a name for the bridge static route for identification purposes.
Active	Activate/deactivate the static route.
Ether Address	Enter the MAC address of the destination machine that you wish to bridge the packets
	to.
IP Address	If available, enter the IP address of the destination machine that you wish to bridge
	the packets to.
Gateway Node	Enter the number of the remote node that is the gateway of this static route. When a
	packet’s destination Ethernet (MAC) address matches the value entered above, it will
	trigger a call to this remote node.

Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.

7-6 Bridging Setup