ZyXEL Communications 480 manual Chapter Remote Node Configuration, Remote Node Setup

Prestige 480 Dual BRI ISDN Router

Chapter 4

Remote Node Configuration

This chapter covers the parameters that are protocol independent. The protocol - dependent configuration (TCP/IP) is covered in the next chapter.

A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up Internet access, you are actually configuring one of the remote nodes. Once a remote node is configured correctly, traffic to the remote network will trigger your Prestige to make a call automatically, i.e., Dia l On Demand.

4.1Remote Node Setup

This section describes the protocol-independent parameters for a remote node.

4.1.1 Remote Node Profile

To configure a remote node, follow these steps:

Step 1. From the Main Menu, select menu option 11 to open Menu 11 - Remote Node Setup.

Step 2. When Menu 11 appears, as shown next, enter the number of the remote node that you wish to configure.

Remote Node Configuration 4-1