ZyXEL Communications 480 manual Configuring the Prestige for Callback with Clid, Prestige on LAN

Prestige 480 Dual BRI ISDN Router

Testing Callback with your Connection

Go to Menu 24.4.5 of the Prestige on LAN 1 and enter the numbers that correspond to the menu in the above LAN 1.

Start dialing for node <LAN_2>…		Prestige on LAN1
### Hit any key to continue ###
$$$	DIALING dev=2 ch=0…..	calls Prestige on
$$$	OUTGOING-CALL phone (123)
$$$	CALL CONNECT speed <64000> type<2> chan<0>	LAN2
$$$	LCP opened
$$$	PAP sending user/pswd
$$$	LCP closed			PAP
$$$	Recv’d TERM-REQ
$$$	Recv’d TERM-ACK state 4			authentication
$$$	LCP stopped
$$$	ANSWER CONNECTED ch=7743 bc
$$$	LCP opened
$$$	IPCP negotiation started		Successful
$$$	IPCP opened
			Connection

Figure 8-12 Testing Callback with your Connection

8.4.4 Configuring the Prestige for Callback with CLID

The only difference between callback with CLID (Calling Line Identification) and callback described above is that you do not pay for the first call i.e., when the Prestige on LAN 1 calls the Prestige on LAN 2. The Prestige (LAN 2) looks at the ISDN D-Channel and verifies that the calling number corresponds with that configured in Menu 11. If they do, the Prestige (LAN 2) hangs up and calls the Prestige on LAN 1 back.

Prestige on LAN 2

8-14 Dial-In Server Configuration