Prestige 480 Dual BRI ISDN Router

Table 4-3 Remote Node PPP Options Menu Fields

Field

Description

Option

Encapsulation

Select the CISCO PPP only when this remote node

Standard PPP

 

is a Cisco machine; otherwise, select the Standard

 

 

PPP.

CISCO PPP

 

 

 

 

 

Compression

You can turn on or off Stac Compression. The

Yes/No

 

 

default for this field is Yes.

(Default = Yes)

 

 

BACP

Allows you to enable or disable the Bandwidth

Enable/Disable

 

Allocation Control Protocol (BACP).

Default = Enable

 

The default for this field is Enable.

 

 

Multiple Link

 

 

Options:

 

 

BOD

Select the direction of the traffic you wish to use in

Default = Transmit

Calculation

determining when to add or subtract a link. The

or Receive

 

default for this field is Transmit or Receive.

 

Min. Channel

Allows you to set the minimum number of channels

1~4

 

the Prestige uses.

 

Max.

Allows you to set the maximum number of channels

1~4

Channels

the Prestige uses.

 

Target Utility

Enter the two thresholds separated by a [-] for

Default=32-48

(kbps)

subtracting and adding the second port.

 

Bandwidth

Allows you set bandwidth increment for the

Default = 64 Kbps

Increment

additional channels, once the threshold is reached

0-64

 

additional channels are opened if the Min. Channels

 

 

 

is greater than one.

 

Add Persist

This parameter specifies the number of seconds

Default = 5 sec

 

 

where traffic is above the adding threshold before

 

 

the Prestige will bring up an additional link.

 

Subtract

This parameter specifies the number of seconds

Default = 5 sec

Persist

where traffic is below the subtraction threshold

 

 

before your Prestige drops a link.

 

Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

Remote Node Configuration

4-9

Page 95
Image 95
ZyXEL Communications 480 manual Remote Node PPP Options Menu Fields, Field Description Option, Standard PPP, Enable/Disable