ZyXEL Communications 480 manual Menu 11.3- Remote Node TCP/IP Options

Prestige 480 Dual BRI ISDN Router

Figure 5-3 LAN 2 Setup

5.2Remote Node Setup

Follow the procedure in Chapter 4 - Remote Node Configuration to configure the protocol-independent parameters in Menu 11 - Remote Node Profile. For the TCP/IP parameters, follow the instructions below. If you are configuring your Prestige to receive incoming calls, you also need to set the default dial-in parameters in Menu 13.

Follow the steps below to edit Menu 11.3 - Remote Node Network Layer Options shown next.

Move the cursor to the Edit IP field in Menu 11.1, then press the space bar to toggle and set the value to Yes. Press [Enter] to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

Rem IP Addr: 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

Single User Account= No

Metric= 2

Private= No

RIP Direction= Both

Version= RIP -2B

Enter here to CONFIRM or ESC to CANCEL:

Figure 5-4 Menu 11.3- Remote Node TCP/IP Options

Remote Node TCP/IP Configuration 5-3