ZyXEL Communications 480 manual Chapter Internet Access, Factory Ethernet Defaults, Route IP Setup

Prestige 480 Dual BRI ISDN Router

Chapter 3

Internet Access

This chapter shows you how to configure the LAN as well as the WAN of your

Prestige for Internet access.

3.1Factory Ethernet Defaults

The Ethernet parameters of the Prestige are preset in the factory with the following values:

1.IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits).

2.DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.

These parameters should work for the majority of installations. If the parameters are satisfactory, you can skip to section 3.4 TCP/IP Ethernet Setup and DHCP to enter the DNS server address(es) if your ISP gives you explicit DNS server address(es). If you wish to change the factory defaults or to learn more about

TCP/ IP, please read on.

3.2Route IP Setup

The first step is to enable the IP routing in Menu 1 - General Setup.

Menu 1 - General Setup

System Name= ?

Location=

Contact Person's Name=

Press ENTER to Confirm or ESC to Cancel:

Internet Access 3-1