ZyXEL Communications 480 manual LAN 1 Setup LAN 2 Setup

Prestige 480 Dual BRI ISDN Router

For the branch office, you need to configure a remote node in order to dial out to the headquarters. Additionally, you may also need to define static routes if some services reside beyond the immediate remote LAN.

LAN 1 Setup

Menu 11.1 - Remote Node Profile

Rem Node Name= LAN_2	Edit PPP Options= No
Active= Yes	Rem	IP Addr= 192.168.2.1
Call Direction= Both	Edit	IP= No
Incoming:	Telco Option:
Rem Login= lan2	Transfer Type= 64K
Rem Password= *******	Allocated Budget(min)=
Rem CLID=	Period(hr)=
Call Back= No	Carrier Acess Code=
Outgoing:	Nailed-Up Connection= No
My Login= lan1	Toll Period(sec)= 0
My Password= ********	Session Options:
Authen= CHAP/PAP	Edit Filter Sets= No
Pri Phone #= 1234	Idle Timeout(sec)= 100
Sec Phone #=

Enter here to CONFIRM or ESC to CANCEL:

IP address of the Prestige on LAN 2

Figure 5-2 LAN 1 Setup

LAN 2 Setup

Menu 11.1 - Remote Node Profile

Rem Node Name= LAN_1	Edit PPP Options= No
Active= Yes	Rem IP Addr= 192.168.1.1
Call Direction= Both	Edit IP= No
Incoming:	Telco Option:
Rem Login= lan1	Transfer Type= 64K
Rem Password= *******	Allocated Budget(min)=
Rem CLID=	Period(hr)=
Call Back= No	Carrier Acess Code=
Outgoing:	Nailed-Up Connection= No
My Login= lan2	Toll Period(sec)= 0
My Password= ********	Session Options:
Authen= CHAP/PAP	Edit Filter Sets= No
Pri Phone #= 1234	Idle Timeout(sec)= 100
Sec Phone #=

Enter here to CONFIRM or ESC to CANCEL:

IP address of the Prestige on LAN 1

5-2 Remote Node TCP/IP Configuration