GE DVMRe Camera Setup, Sensitivity Scope, Main Menu → Motion Detection → Indicate Detection

Pressing the Function button will bring up the Help screen shown on the next page. This screen will overlay the current video image.

{F}

Function

Button

‘MENU’ : Exit Activity Setup

‘ENTER’: Save and Exit Activity Setup

‘PAUSE’: Toggle between Enable and Neutral

‘STOP’ : Toggle between Disable and Neutral

‘ZOOM’ : Disable/Enable all zones

‘PLAY FORWARD’: Increase the Sensitivity level

“PLAY REVERSE’: Decrease the Sensitivity level

Sensitivity Scope

Use the sensitivity scope to adjust the motion detection sensitivity for the scene. The sensitivity scope is the bar located near the left-hand corner of the screen.

The black bar raises and lowers to indicate the degree of motion detected. When the black bar reaches the red bar, a motion detection alarm is activated.

Adjusting Motion Detection Sensitivity: Raise and lower the red bar to change the motion detection sensitivity. Use the Play Forward button to increase the sensitivity level and the Play Reverse button to decrease the sensitivity level. The sensitivity level is also displayed as a numeric value.

Play Reverse to decrease the Sensitivity

Play Forward to increase the Sensitivity

qMain Menu → Motion Detection → Indicate Detection

Motion Detection may be indicated on-screen by displaying the letter M. Use this menu to turn this feature On or Off.

Indicate Detection

Detection

ON

3.14 Camera Setup

Use this menu to:

∙Edit the title for each camera.

∙Adjust the Automatic Gain Control.

∙Disable or Enable camera inputs.

∙Specify cameras as covert (recorded but not displayed).

∙View the Camera Scope (Histogram)

Camera Titles

Camera AGC

Camera Disable

Covert Camera

Camera Scope

qMain Menu → Camera Setup → Camera Titles

Use this menu to:

∙ Specify if the camera titles will be displayed on the monitors. Edit the title for each camera.

Titles Display

Edit Titles

0150-0193F 52 Kalatel DVMRe Triplex