GE DVMRe user manual RJ-45 Pin Configuration For Ethernet Port, Scsi Port, Ieee 1394 Firewire Port

RJ-45 Pin Configuration For Ethernet Port

Pin	Use		Pin	Use
						1 2 3 4 5 6 7 8
1	TX+	5		Not Connected
2	TX-	6		RX-
3	RX+	7		Not Connected
4	Not Connected	8		Not Connected	RJ-45 socket on
						back panel.

NOTE	SCSI and IEEE 1394 archiving devices should not be connected to the Kalatel DVMRe
	Triplex simultaneously. Archiving support is only available for one or the other type of
	interface at a time.

SCSI Port

The unit is equipped with a SCSI port for connecting external archive devices. The unit only supports a single SCSI device. The SCSI ID of the archive device must be set to 0.

The SCSI bus must be terminated, otherwise the system will not operate properly.

Additional menu setup may be necessary to configure archive device. See section 3.15.

Connector: 50 Pin, High Density SCSI-2.

Gender (on unit) : Female

Compatible devices : DVSe, RAID, DAT, AIT, CD-R, CD-RW

SCSI ID : 0

IEEE 1394 Firewire Port

The unit is equipped with an IEEE 1394 Firewire port for connecting Firewire compatible external archive devices. For information on the approved devices, please refer to the Archiving Addendum manual that is supplied with this unit.

Cable: 6 position Firewire

Connectors: 6 position DIP

0150-0193F 15 Kalatel DVMRe Triplex