Initial Setup for Basic Connections (Ready to Play)
Before doing Initial Setup
1Turn TV on.
2See connections 
RF Coaxial Cable Connection and 
AV Cable Connection on page 12.
<RF Coaxial Cable Connection> ÖSet TV to channel 3.
<AV Cable Connection> ÖSet TV to VIDEO.
3[DECK ➛ TV]
• Go to “Initial Setup (Ready to Play).” (See below.)
[Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV]
•Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
•If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
1
2
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts.
•If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4.
•To change VCR’s output channel, please see “VCR’s Output Channel” on page 19.
Plug VCR Power plug into an AC wall outlet.
Notes
•Function buttons are void during Initial Setup.
•To eject a tape during Auto Set, press EJECT on remote or STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
•If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See p. 18.)
Continued on next page...
16 | For assistance, please call : |
| |
|
