Before Using
Congratulations
on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK.
•Date of Purchase
•Dealer Purchased From
•Dealer Address
•Dealer Phone No.
• Model No.
• Serial No.
Accessories
Remote Control
EUR7724KE0
Head Cleaning
Playing older or damaged tapes may eventually cause video heads to become clogged.
Video Head Clog Sensor
During playback, this screen appears if clogging is detected. To remove screen, press PLAY on the remote or DECK.
•Use “dry” type head cleaning cassette only. (Part No.
•Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life.
•If head clog symptoms persist, contact your nearest servicenter by visiting our Web Site (see p. 61).
Cleaning DECK
Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes on the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various solvents.
Avoid excessive use of
Loading the Batteries
1) Open cover.
2) Insert batteries as marked.
3) Close cover.
Battery replacement caution
•Do not mix old and new batteries.
•Do not mix alkaline with manganese batteries.
Record/ Playback Time
Only use tapes with the 
mark in this DECK.
Tape Speed |
| Type of Video Cassette | ||
|
|
|
| |
Setting |
| T120 | T160 | T180 |
|
|
|
|
|
SP | 2 | Hours | 2 Hours | 3 Hours |
(Standard Play) | 40 Minutes | |||
|
|
|
|
|
SLP | 6 | Hours | 8 Hours | 9 Hours |
(Super Long Play) | ||||
|
|
|
|
|
Features for a Quality Picture (VCR)
Digital Auto Picture
Automatically controls the video output signal for less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture noise.
Press CH (TRACKING) 
/ 
on the remote control or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off, then on again a few seconds later.
R |
| R |
| |
R | R | R | R | |
R | R | |||
|
|
In Still mode, CH (TRACKING) 
/ 
operate as a
4For assistance, please call :
