VCR’s Output Channel
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
POWER
NUMBER keys
CH 
/
ADD/DLT
ACTION
Time Zone Adjust
(Only when Auto Clock is set.)
1)Press 
to select “SET CLOCK,” and press SET.
2)Press 
to select
“TIME ZONE ADJUST,”
and press SET to subtract or add hour(s) as necessary.
3)Press ACTION.
•“TIME ZONE ADJUST” returns to “0” if clock is set manually.
VCR’s Output Channel
1)Press 
to select “VCR’S OUTPUT CH.,” and press SET.
2)Press SET.
3)Press ACTION.
➡ | After 3 seconds |
|
SELECT
SET
VCR
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys and press ADD/DLT.
To delete channel:
Select channel with CH 
/ or NUMBER keys and press ADD/DLT.
DST (Daylight Saving Time)
DECK auto adjusts clock for DST. (p. 17.)
Spring (First Sunday in April)
DST:ON ➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON ➛ Turns clock back one hour.
Basic Operation
•To Make Corrections, repeat steps 1) ~ 3).
•If your area does not observe Daylight Saving Time, select DST:OFF.
•Keep these time changes in mind when programming DECK for timer recordings.
19
