Panasonic PV-D4735S operating instructions Rear View of Deck, To enjoy Progressive Scan video

Location of Controls (continued)

Rear View of DECK	Bold:	VCR Function		Italic: DVD Function
	Bold Italic: VCR and DVD Functions
AC Power Plug			VHF/UHF Antenna Output Terminal
• While plugged into an AC outlet,			p.12
this DECK consumes 0.9 W of			VHF/UHF Antenna Input Terminal
electrical power in off mode.
			p. 12
Component Video Output			Video Output	Video Input
Connector (Y, PB, PR)			Connector	Connector
(DVD Only)			p. 12	p. 35
p. 13

• • •

Optical Digital Audio
Output Connector		Audio Input
(DVD Only)
		Connector (L/R)
p. 15		p. 35
S-Video Out Connector
(DVD Only)	Audio Output 2	Audio Output 1
pp. 10, 13
	Connector (L/R)	Connector (L/R)
	p. 13	p. 12

The following table shows the status of the output jacks when in VCR or DVD mode.

	Video Output	Component		S-VIDEO OUT
	Audio Out 1
		Video Output
	Audio Out 2
VCR	YES	N/A		N/A
DVD	YES		YES

Note • PROG functions on the remote are not available when using Component Video Output and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.

To enjoy PROGRESSIVE SCAN video

(1). Connect Component Video Output to the component video input terminals of a television. (See p. 13.)

(2). When PROGRESSIVE OUT is set to “ON” in the DVD Main Menu (p. 55), a Progressive Scan signal is output from the Component Video Output Connector.

Notes

•The screen may shift off-center when using progressive output. Please adjust the screen position if this occurs. (Refer to your TV manual.)

•If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and

set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.)

10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo