Useful Telephone Settings
26 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
6Press {ih}.
Note:
LThe handset will not vibrate while on the
charger.
Changing ringer types
You can change the ringer type used by the
handset.
“EXT Ringer Type”: Selects the ringer for
outside calls.
“INT Ringer Type”: Selects the ringer for
intercom calls.
“Paging Tone”: Selects the ringer heard
when the base unit pages the handset.
“Private Ring”: Allows you to set a
different ringer for each private category (for
Caller ID subscribers only).
1Press $ (centre of joystick).
2Select t, then press ,.
3Select “Ringer Option”, then press
,.
4Select the desired item, then press
,.
LThe ringer sounds using the current
ringer type.
5Select the desired ringer type, then
press ,.
6Press {ih}.
Note:
LIf you select one of the melody ringer
types, the ringer will continue to sound for
several seconds if the caller hangs up
before you answer. You may hear a dial
tone or no one on the line when you
answer a call.
LThe preset melodies in this product are
used with permission of M-ZoNE Co., Ltd.
Tone options
Turning key tones on/off
Key tones are tones heard when keys are
pressed. Includes confirmation tones and
error tones.
1Press $ (centre of joystick).
2Select t, then press ,.
3Select “Tone Option”, then press
, 2 times.
4Select “On” or “Off”, then press ,.
5Press {ih}.
Display options
Selecting the standby mode display
“Base Number”: The current base unit
number is displayed.
“Handset Name”: The name of the handset
is displayed.
“Off”: Only the current date and time are
displayed.
1Press $ (centre of joystick).
2Select t, then press ,.
3Select “Display Option”, then press
, 2 times.
4Select the desired setting, then press
,.
5Press {ih}.
Selecting the talk mode display
You can change what is shown on the
display when you make a call.
“Talk Time”: The length of the current call
will be displayed.
“Phone Number”: The phone number you
dialled will be displayed.
1Press $ (centre of joystick).
2Select t, then press ,.
3Select “Display Option”, then press
,.