Engine
Engine
NOTE: All service to the engine must be performed by an authorized HONDA dealer,
Removal
6.Remove four screws (189), washers (114), washers (170) and nuts (118) and remove rocker plate, dampeners (59) and washers (114) from engine.
Installation
1.Relieve pressure, page 7.
2.Do Fan Belt, Removal; page 13.
3.Loosen hand nut (241). Swing bracket (30) out.
4.FIG. 4. Disconnect red and black leads from engine.
5.Remove engine and rocker plate (87c) from sprayer.
1.Install rocker plate (87c), dampeners (59) and wash- ers (170), washers (114) on engine (185) with four screws (189), washers (170) and nuts (118); torque to 20 ft-lb (27.1 N•m).
2.Install engine and rocker plate (87c) on sprayer.
3.Connect red and black leads.
4.Do Fan Belt, Installation; page 13.
5.Swing motor retainer bracket (30) in. Tighten hand nut (241).
GREEN
RED
BLACK
|
| 118 | |
241 | 30 | 170 | |
114 | |||
|
| ||
|
| 59 |
87c
114 | TI6520b |
189 |
|
FIG. 4
14 | 313776G |
