Oil/Filter Change
Removal
1. FIG. 6 Place drip pan or rags under sprayer to catch
hydraulic oil that drains out.
199
2. Remove drain plug (195). Allow hydraulic oil to drain.
3. Unscrew filter (199) slowly - oil runs into groove and drains out rear.
Installation
1. | Install drain plug (195). Apply a light coat of oil to oil |
|
| filter gasket and install oil filter (199). Tighten oil fil- |
|
| ter 3/4 turn after gasket contacts base. |
|
2. | Fill with 1.25 gallons (4.73 liters) of Graco hydraulic |
|
| oil 169236 (5 gallon/20 liter) or 207428 (1 gallon/3.8 | FIG. 6 |
| liter) | |
|
| |
3. | Check oil level. |
|
4. | Check oil level. |
|
Oil/Filter Change
ti2271a
313776G | 17 |
