Maintenance

Maintenance

Pressure Relief Procedure

1.Engage trigger lock.

2.Turn engine ON/OFF switch to OFF.

3.Move pump valve to OFF (clockwise) and turn pres- sure control knob fully counterclockwise.

4.Disengage the trigger lock. Hold a metal part of the gun firmly to a grounded metal pail, and trigger the gun to relieve pressure.

5.Engage the trigger lock.

6.Open pressure drain valve. Leave valve open until you are ready to spray again.

If you suspect the spray tip or hose is completely clogged, or that pressure has not been fully relieved after following the steps above, VERY SLOWLY loosen tip guard retaining nut or hose end coupling to relieve pressure gradually, then loosen completely. Clear hose or tip obstruction.

CAUTION

•Minimum hose size allowable for proper sprayer operation is 3/8 in. x 50 ft.

•For detailed engine maintenance and specifica- tions, refer to separate Honda Engines Owner's Manual, supplied.

DAILY: Check engine oil level and fill as necessary.

DAILY: Check hydraulic oil level and fill as necessary.

DAILY: Check hose for wear and damage.

DAILY: Check gun safety for proper operation.

DAILY: Check prime/spray drain valve for proper opera- tion.

DAILY: Check and fill the gas tank.

DAILY: Check that displacement pump is tight.

DAILY: Top off TSL level in displacement pump packing nut to help prevent material buildup on piston rod and early wear of packings.

AFTER THE FIRST 20 HOURS OF OPERATION: Drain engine oil and refill with clean oil. Reference Honda Engines Owner's Manual for correct oil viscosity.

WEEKLY: Remove engine air filter cover and clean ele- ment and replace, if necessary. If operating in an unusu- ally dusty environment: check filter daily.

WEEKLY/DAILY: Remove any debris from hydraulic rod.

AFTER EACH 100 HOURS OF OPERATION: Change engine oil. Reference Honda Engines Owner's Manual for correct oil viscosity.

SEMI-ANNUALLY:Check belt wear, page 18; replace if necessary.

YEARLY OR 2000 HOURS: Replace hydraulic oil and filter element with Graco hydraulic oil 169236 (5 gal- lon/18.9 liter) or 207428 (1 gallon/3.8 liter) and filter ele- ment 246173; page 17.

SPARK PLUG: Use only BPR6ES (NGK) or W20EPR-U (NIPPONDENSO) plug. Gap plug to 0.028 to 0.031 in. (0.7 to 0.8 mm). Use spark plug wrench when installing and removing plug.

Caster Wheel

(See letter call-outs in Parts drawing on page 19.)

1.Once each year, tighten nut (127, detail A) until spring washer bottoms out. Then back off the nut 1/2 to 3/4 turn.

2.Once each year, tighten nut (127) until it begins to compress spring washer. Then tighten the nut an additional 1/4 turn.

3.Once each month, grease the wheel bearing (F).

4.Check pin (55) for wear. If pin is worn out, there will be play in the caster wheel. Reverse or replace the pin as needed.

5.Check caster wheel alignment as necessary. To align: loosen bolt (145), align wheel and tighten bolt.

313776G

7

Page 6 Page 8
Page 7
Image 7
Graco 130HS important safety instructions Maintenance, Pressure Relief Procedure, Caster Wheel
Page 6 Page 8

130HS specifications

The Graco 130HS is a highly regarded airless paint sprayer, designed to meet the demands of both professionals and DIY enthusiasts. This versatile tool excels in providing smooth, even coverage across a variety of surfaces, making it an essential addition to any painting arsenal.

One of the primary features of the Graco 130HS is its robust performance capabilities. It boasts a powerful motor that can handle a wide range of materials, from thin stains to thicker paints. This flexibility allows users to tackle a variety of projects, including residential and commercial applications. The sprayer has a maximum pressure rating of 3000 PSI, which ensures that it can atomize even the most challenging coatings, delivering a consistent finish.

Another standout characteristic of the Graco 130HS is its LightSpeed technology, which optimizes spray patterns and reduces overspray. This feature not only saves material but also enhances precision, making it easier to paint intricate surfaces without the worry of unintended coverage. The adjustable pressure settings give users the ability to control the flow of paint, further allowing for customization based on the specific project requirements.

The Graco 130HS also incorporates a durable build quality that's designed for long-term use. Constructed with high-grade materials, it can withstand the rigors of day-to-day operation on various job sites. Its compact and portable design makes it easy to transport, enabling users to move from one project location to another with ease.

Moreover, the user-friendly interface features a simple setup process, allowing for quick preparation and less downtime before work begins. The spray tip system is designed for easy swapping, providing versatility in achieving different spray patterns and finishes.

In conclusion, the Graco 130HS airless paint sprayer is an efficient, reliable tool that brings professional-grade performance to both seasoned painters and novices alike. With its powerful motor, innovative technologies, and durable construction, it stands out in the market, ensuring that every project is completed with precision and ease. Whether you’re painting a room, a fence, or undertaking a larger renovation, the Graco 130HS provides the capability and reliability needed to achieve stunning results.
Top Page Image Contents