Securing Child in Infant Restraint, Point Harness p

6.2 Securing Child in Infant Restraint

Failure to properly secure your child in the infant restraint/carrier
increases the risk of serious injury or death from suffocation or
falls, or in the event of a sudden stop or crash. Even when used
only as a carrier, make sure the harness straps are properly
secured.
1.	Move infant restraint handle to sitting position (see page 13).
2.	Open harness clip by		➐
	squeezing both sides and
	unbuckle as shown ➐.		OR
3.	Place your child in the infant		➑	➒
	restraint as shown in ➑, not ➒.
	Pull the harness straps
	down over your child.
4.	Follow directions for your
	harness:	3-Point Harness: p. 34
	6.2.1
	6.2.2	5-Point Harness: p. 35