Training

Pairing Your ANT+ Sensor

If your Forerunner does not show heart rate or foot pod data, you may need to pair the accessory to your Forerunner. Pairing is the connecting of ANT+™ wireless sensors, for example, connecting your foot pod with a Forerunner. After you pair the first time, your Forerunner automatically recognizes your foot pod each time it is activated.

Before you can pair, you must put on the heart rate monitor or install the foot pod. For more information, refer to the instructions included with your accessory or refer to the Forerunner 210 Quick Start Manual.

•Bring the Forerunner within range (3 m) of the accessory.

Stay 10 m away from other ANT+ sensors while pairing.

• If is off, press and hold menu, and select HR Monitor > On.

•If is flashing, from the timer page, press page to view the heart rate page.

The Forerunner searches for your heart rate signal for 30 seconds.

• If is off, press and hold menu, and select Foot Pod > On.

•If is flashing, make sure your foot pod is installed correctly, and walk around to activate the foot pod.

•If you still cannot pair the accessory, replace the accessory battery pages 19–20.

When the accessory is paired, a message appears, and or appears solid on the screen.



Forerunner 210 Owner’s Manual