Graco 220-569 Mounting Stand Kit, Pump Floor Stand, Stationary Stand, Wall Bracket, Portable Cart

Accessories

Use Only Genuine Graco Parts and Accessories

Mounting Stand Kit 218–742

For mounting the surge tank to the floor.

Pump Floor Stand 220–581

For mounting medium volume High-Flo pumps in a suction feed system.

Refer to the Medium Volume High-Flo Accessories Manual, 307–837.

Stationary Stand 207–872

For President, Bulldog, and Senator Pumps.

Wall Bracket 206–221

For mounting medium volume High-Flo pump to a wall.

Portable Cart 218–028

For President, Bulldog, and Senator Pumps.

Packing Nut Wrench 110–335

For tightening the packing nut.

Throat Seal Liquid (TSL)

Non-evaporating liquid for packing nut/wet-cup.

206–9950.95 liter (1 quart)

206–996 3.8 liter (1 gal.)

Graco-Approved Hydraulic Fluid

169–236	20 liter (5 gal.)
207–428	3.8 liter (1 gal.)

Hydraulic Shutoff Valve 102–644

For hydraulic supply or return line. 3/4 npt(f).

Hydraulic Supply and Return Hose

10.5MPa, 105 bar (1500 psi) Maximum Working Pressure

5/8 in. ID, coupled 3/4 npt x 7/8–14, 90_ swivel elbow, grounded, for return line.

180–091	0.9 m (3 ft) long
180–092	1.8 m (6 ft) long

13.8MPa, 138 bar (2000 psi) Maximum Working Pressure

1/2 in. ID, coupled 1/2 npt(m) x 3/4–16, 90_ swivel elbow, grounded, for supply line.

180–090	0.9 m (3 ft) long
180–093	1.8 m (6 ft) long

Pump Mounting Adapter Kits

Provides adapter plate and tie rods for retrofitting existing motor to a High-Flo displacement pump. Refer to Medium Volume High-Flo Accessories Manual 307–837.

220–579For Series A, B, C, or D Bulldog Mo- tors, Part No. 208–356, and Series A Senator Motor, Part No. 217–540.

More recent series of these motors do not require this kit.

221–159Required for all Viscount I and Presi- dent Motors.

Siphon Tube Kit 213–099

To draw fluid from a 200 liter (55 gallon) drum.

3￿7￿8￿9 39