Graco 222800 Series C important safety instructions 107 106 104 102 103

1 128

111

Service

WARNING

MOVING PARTS HAZARD

Use caution when disassembling the trip

rod. The trip rod spring (110) is under tension. When the trip rod is unscrewed

tension is released, and parts may be projected through the air with considerable force.

1281

3

106} 9

2

108}

5 2

			104		129}	104
		113n		4	2
					7	103{}	1
		1 112n				102{}	1
124
			1 114n		110}		6
		K
104 10	2		1 117n
			1 115n			101
					129}
					7
			1	105
8	1	119			108}
		1 {120			109}

4 2 104

1 123n

121n122 1

1Lubricate with heavy-duty lithium grease.

2Apply thread sealant.

3 Grease ends of trip rods (106). 4 Torque to 9 NSm (75 in-lb).

5Torque to 2–3 NSm (20–30 in-lb).

6Lips must face into the housing (101).

7Press fit flush with the inside surface of the guide (108).

8 Lip (K) must face toward the nearest end of the carriage (111).

9Torque to 17–23 NSm (150–200 in-lb).

10Torque to 9 NSm (75 in–lb) and unscrew as needed for plates (124) to be flush with housing (101).

		1
107}		2
		106}
104		9		6
2	5	102{}		1
		103{}		1
		104
		5	2

3

01346

{These parts are included in Air Valve Repair Kit 222959, which may be purchased separately.

}These parts are included in Trip Rod Kit 222981, which may be purchased separately. The kit also includes the assembled trip rod.

nThese parts are included in Detent Kit 222982, which may be purchased separately.

Fig. 8

16 308213