Table of Contents
Warnings | . 2 | Parts | 14 |
Installation | . 5 | Conversion Kits | 18 |
Operation | . 8 | Dimensions | 19 |
Troubleshooting | 10 | Mounting Hole Layout | 19 |
Service |
| Technical Data | 20 |
Disconnecting the Displacement Pump | 11 | Graco Standard Warranty | 24 |
Reconnecting the Displacement Pump | 11 | Graco Information | 24 |
Displacement Pump Service | 12 |
|
|
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
DThis equipment is for professional use only.
DRead all instruction manuals, tags, and labels before operating the equipment.
DUse the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor.
DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.
DCheck equipment daily. Repair or replace worn or damaged parts immediately.
DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 20 for the maximum working pressure of this equipment.
DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
DDo not use hoses to pull equipment.
DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below
DWear hearing protection when operating this equipment.
DDo not lift pressurized equipment.
DComply with all applicable local, state, and national fire, electrical, and safety regulations.
2307619
