Graco 239877, 239888, 239887 warranty Injection Hazard

Models: 239888 239877 239887

1 18
Download 18 pages 23.58 Kb
Page 3
Image 3

WARNING

INJECTION HAZARD

Fluid from the dispensing valve, leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.

DFluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate medical attention.

DDo not point the dispensing valve at anyone or at any part of the body.

DDo not put your hand or fingers over the end of the dispensing valve.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DUse only extensions and no-drip tips which are designed for use with your dispensing valve.

DDo not use a low pressure flexible nozzle with this equipment.

DFollow the Pressure Relief Procedure on page 7 if the grease fitting coupler clogs and before you clean or service this equipment.

DTighten all fluid connections before you operate this equipment.

DCheck the hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. Do not repair high pressure couplings; you must replace the entire hose.

TOXIC FLUID HAZARD

Hazardous fluids or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

308883 3

Page 3
Image 3
Graco 239877, 239888, 239887 warranty Injection Hazard