![](/images/new-backgrounds/1199148/19914811x1.webp)
Installation
Air and Fluid Line and Accessories
See Fig. 2 above.
WARNING
Three accessories are required in your system: an air
DThe air bleed device relieves air trapped between it and the air motor after the air supply is shut off. Trapped air can cause the air motor to cycle unexpectedly, causing serious injury if you are adjusting or repairing the pump. Use a
DThe fluid drain valve (K) assists in relieving fluid pressure in the displacement pump, hoses, and dispensing valve. Triggering the valve to relieve pressure may not be sufficient.
DThe ground wire (B) reduces the risk of static sparking.
4.Install the air regulator (C) to control pump speed and pressure (see WARNING at left).
5.Install an air line filter (E) to remove harmful dirt and contaminants from your compressed air supply.
6.Install a second
CAUTION
Do not hang the air accessories directly on the air inlet. The fittings are not strong enough to support the accessories and may cause one or more to break. Provide a bracket on which to mount the accessories.
NOTE: Install the air line accessories in the order shown in Fig. 2.
1.Install a pump runaway valve (G) to shut off the air to the pump if the pump accelerates beyond the
2.Install an air line lubricator (F) for automatic air motor lubrication.
3.Install a
6308883