7.Connect chemical injector hose (5) to valve (1) at barbed fitting.
ti17848a
8. Install the suction hose (3) at the pump inlet.
ti17849a
9. Screw strainer (2) onto the end of the suction hose.
ti17850a
Table 1: Wrench Sizes
Model Number | Wrench Size |
|
|
2730 DD | 22mm |
|
|
3030 DD and 3540 DD | 27mm |
|
|
4043 BD | 30mm |
|
|
Table 2: Torque Specifications
| Model Number | Torque |
|
|
|
2730 | DD | 60 |
|
|
|
3030 | DD and 3540 DD | 73 |
|
|
|
4043 | BD | 73 |
|
|
|
Operating Instructions
1.Place the suction hose and chemical injector hose into the water supply.
2.Start engine (see engine manual provided with pressure washer for correct engine starting proce- dure).
3.With nozzle removed, squeeze gun trigger so water begins to flow from hose/gun assembly (this allows the unit to prime and purge any air from the system). The unit is primed once water flow is uninterrupted by air.
4.Once unit is primed, release trigger and lock gun in OFF position. Securely connect desired nozzle assembly.
NOTE: Refer to instruction manual supplied with the unit for any further operating instructions.