![](/images/new-backgrounds/1057878/5787821x1.webp)
7.Align holes on main bracket (101) and thread inserts of the hopper (D). Loosely fasten hopper (D) to bracket (101) with four screws (107) and washers (110).
D
101 | 110 |
| 107 |
FIG. 9: Attach Hopper to Bracket
8. Connect swivel fitting (202) to nipple (201).
201
202
FIG. 10: Connect Fluid Inlet Assembly to Hopper
Installation
9.Tighten union (208) and ensure fluid outlet assem- bly is aligned. See FIG. 7 on page 10.
10.Tighten hopper mounting screws (107). See FIG. 9.
11.Install screws (107) and bottom support (109).
107 | D |
107
109
FIG. 11: Install Bottom Support
12. Repeat steps
312747L | 11 |