Problem Cause Solution | Graco 257500, 258699 guide

		Troubleshooting

Problem	Cause	Solution


SmartDie™ screed box	Foreign material in screed box discharge	CAREFULLY dislodge and remove foreign
leaking	opening	material.
	Dirty screed box	CAREFULLY clean box. All moving parts
		need to be free of debris.

	Spring broken	Replace spring (see page 13).

	Incorrect deployment rod linkage length	Adjust length (see page 14).

	Incorrectly adjusted SmartDie™ screed	Adjust lever (see page 14).
	box/bead dispenser box actuator

	Worn screed box gate	Replace gate (see Parts manual 313880).

	Worn screed box trough	Replace trough (see Parts manual
		313880).

Excessive material	Screed box not adjusted to ground	See Operation manual.
buildup when starting
buildup when starting	Screed box open when ThermoLazer™ is	Synchronize ThermoLazer™ and screed
and stopping extruding	Screed box open when ThermoLazer™ is	Synchronize ThermoLazer™ and screed
and stopping extruding	stationary	box motion.
	stationary	box motion.

	Foreign material in screed box discharge	CAREFULLY dislodge and remove foreign
	opening	material.

	Dirty screed box	CAREFULLY clean box. All moving parts
		need to be free of debris.

Beads not discharging	Low bead level in bead hopper	Fill bead hopper.
or discharging unevenly
or discharging unevenly	Bead dispenser doors closed	Open doors as required to obtain desired
		flow pattern width.

	Bead dispenser drive wheel not engaged	Secure bead dispenser wheel (see page
		14).

	Bead dispenser drive wheel slipping	Tighten. Check air pressure (see page 14).

	Debris in discharge opening of bead dispenser	Remove debris.

	Debris on ThermoLazer™ tire or bead dis-	Remove debris.
	penser wheel

	Moisture in beads	Remove wet beads. Dry hopper, bead
		hoses and bead dispenser. Fill hopper with
		dry beads.

Beads not discharging	Bead dispenser flow rate lever not correctly	Rotate flow rate lever to correct position.
at required flow rate	set

	Bead dispenser drive wheel slipping	Tighten wheel and check tire pressure
		(see page 14).

	Bead dispenser doors not fully open	Open door fully.

	Moisture in beads	Remove wet beads. Dry hopper, bead
		hoses and bead dispenser. Fill hopper with
		dry beads.

	Moisture on road surface	Allow road surface moisture to dry.

	Rough road surface	Smooth road surface.

	Bead Dispenser low on material	Add material to Bead Hopper.

313879B

257500, 258699 specifications

The Graco 258699 and 257500 models are two prominent products from Graco, a leading manufacturer in the field of paint spraying equipment. These models are designed to deliver exceptional performance, making them ideal for both professionals and DIY enthusiasts. The core features, technologies, and characteristics of these paint sprayers highlight their efficiency and versatility.

Both the Graco 258699 and 257500 models are equipped with powerful electric motors that ensure a smooth and consistent spray. This feature is crucial for achieving a professional finish on various surfaces. They boast an adjustable pressure control, allowing users to customize the spray output to suit different applications, whether it be fine finishing or heavier coatings.

Another notable characteristic is the ease of use. Both models include a lightweight design, complemented by a user-friendly interface. This enables operators of all skill levels to maneuver the sprayers with confidence and ease. Moreover, the integrated carrying handle enhances portability, making it convenient for users to transport the sprayers to different job sites.

Graco has incorporated advanced technology into these models to optimize performance. The SmartControl technology ensures a consistent spray fan and pressure, which is pivotal in preventing overspray and delivering a uniform finish. This technology is particularly appreciated in professional settings where precision is key.

In terms of versatility, both sprayers can handle a wide range of materials, from water-based paints to thicker coatings. The FlexLiner system utilized in these models allows for quick changes between colors and easy cleaning, minimizing downtime on projects. Additionally, the reversible tip feature aids in reducing clogs, making for a more efficient spraying process.

The construction quality of the Graco 258699 and 257500 models also stands out. They are built with durable materials that withstand heavy usage, ensuring longevity and reliability. The professional-grade components meant for demanding environments make them suitable for various applications, including exterior and interior projects.

In conclusion, the Graco 258699 and 257500 paint sprayers offer powerful performance with advanced technology designed to meet the needs of both professionals and DIYers. With features like adjustable pressure control, SmartControl technology, and a user-friendly design, they stand out in the competitive market of paint spraying equipment. Their durability and versatility cement Graco's reputation as a trusted brand, making these models worthwhile investments for efficient and high-quality painting tasks.

Graco 257500, 258699 important safety instructions Problem Cause Solution

Models: 257500 258699

Problem

Cause

Solution

257500, 258699 specifications