Setup
Setup
1.Apply thread sealant to the male threads of the air needle valve (48) and the quick disconnect fitting (49) and install. See FIG. 4
3.Use labels (70) provided to identify the appropriate pump for your material. See FIG. 5.
1Apply thread sealant
1
48
1
49
WL D
FIG. 4
2. Apply thread sealant to the male outlet fitting (not supplied) and insert into the outlet port. See FIG. 5.
1 Apply thread sealant
1
1
FIG. 5
FIG. 6
4.Lubricate the bung adapter inside diameter and mounting threads. Ensure the gasket is in place and screw the bung adapter (51) securely into the bung- hole of the drum. Insert the pump through the adapter and lock it in place. See FIG. 7.
2Lubricate threads
51
2
FIG. 7
311882T | 9 |
