Low Battery Indication

Parent Unit

• When the battery is low in the Parent Unit, the low battery symbol will show in the center of the LCD screen. If operated too long on a low battery, you may also

experience a poor signal and the no connection symbol on the LCD screen will appear and you will begin to hear a continuous audible beep from the Parent Unit.

• You may either turn off the unit or plug in the A/C adapter to recharge the batteries.

Nursery Unit

• When the batteries are low in the Nursery Unit, the power LED will change from green to red. You may also experience a poor signal and the no connection symbol on the LCD screen on the front of the Parent Unit may change and you will begin to hear the Parent Unit beep.

• You may either turn off the unit, plug in the A/C adapter or replace the batteries.

Out of Range Indication

• If the Parent Unit begins to lose the signal from the Nursery Unit, the no connection

symbolon the LCD screen will appear. Additionally, a continuous audible beep will be generated to warn the user that the connection to the Nursery Unit has been lost.

• Immediately move the Parent Unit closer to the Nursery Unit to regain connection.

• Once connection has been re-gained, the connection symbol will change to and the audible beep will stop.

***Note: It is not uncommon for the Parent Unit to occasionally lose and regain connection with the Nursery Unit in environments that have a significant amount of obstructions.

Setting Up the Baby Monitor

***NOTE: It is very important that the steps below be followed for first time power-up.

1.For optimum operation, it is best to charge the batteries in the Parent Units for at least 16 hours prior to use. The rechargeable batteries need to be installed into the Parent Unit before charging - refer to the “Battery Installation” section. DO NOT turn on power while the unit is charging for the first time.

2.Place the Nursery Unit within 10 feet (3 meters) of your baby. Plug an AC adapter into the jack on the back of the Nursery Unit. Plug it into a working 120 volt AC outlet.

3.Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission.

4.Place the Parent Unit within five (5) feet (1.5 meters) of the Nursery Unit and turn on the Parent Unit using the On/Off button on right side of the LCD screen.

5. Turn on the Nursery Unit using the On/Off button on the front of the unit.

6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit.

A second later, you will hear a series of beeps and the connection symbol should

change to . Your monitor is now ready for use.

NOTE: If the symbol shows, the Parent Unit is out of range of the Nursery Unit.

Temperature Sensor

• Temperature sensor measures the temperature of the baby's room and displays it on the LCD of the Parent Unit.

• To change °F to °C, hold Volume down button while pressing power button for 2 seconds until it beeps, then press the NightLight button for 2 seconds.

•NOTE: DO NOT put temperature sensor near a heat source or air conditioning vent.

•NOTICE: We have added the thermometer for your convenience. Ambient temperature readings may be affected by various factors, including (but not limited to) location with respect to windows, electrical devices and sunlight. We recommend you check the accuracy of the thermometer in its location with your home thermometer.

4

Page 3 Page 5
Page 4
Image 4
Graco 2M18, 2M17 warranty Low Battery Indication, Setting Up the Baby Monitor, Temperature Sensor, Out of Range Indication
Page 3 Page 5

2M18, 2M17 specifications

Graco, a leader in fluid handling equipment, has made significant strides in the development of airless sprayers, notably with the introduction of the Graco 2M17 and 2M18 models. These sprayers are designed for professional contractors who demand high performance, reliability, and versatility in their painting applications.

One of the standout features of the Graco 2M17 and 2M18 is their robust engine power, which enables efficient and fast spraying of various materials. These models are equipped with Graco’s QuikReel technology, allowing users to easily manage the hose and prevent tangles. This feature not only saves time but also enhances workflow, making these sprayers ideal for large-scale projects.

Moreover, the 2M17 and 2M18 sprayers come with a proven piston pump design that delivers consistent pressure and fluid flow. This results in a smooth and even finish, reducing the need for touch-ups. The high-efficiency airless design minimizes overspray, making them suitable for both indoor and outdoor applications.

Built for durability, the Graco 2M17 and 2M18 models feature a rugged frame and premium components that can withstand the rigors of daily use. This durability extends to their easy maintenance, with features such as accessible filters and simple disassembly for cleaning. Contractors can spend more time working and less time worrying about potential breakdowns.

The versatility of the 2M17 and 2M18 sprayers cannot be understated. They are designed to handle a variety of coatings, from thin stains to thicker paints, making them suitable for various surfaces, including wood, metal, and concrete. The models come with adjustable pressure settings, allowing users to tailor the spray pattern to their specific project needs.

Furthermore, the inclusion of an integrated spray gun with a reversible tip ensures that clogs can be cleared quickly without interrupting the workflow. The lightweight and ergonomic design of the sprayers also contribute to user comfort, allowing for extended periods of operation without excessive fatigue.

In conclusion, Graco’s 2M17 and 2M18 airless sprayers are built for professionals who need reliable and efficient equipment. With features such as QuikReel technology, a durable piston pump, and versatility in material handling, these models represent a strong investment for contractors looking to achieve high-quality results. Whether used for residential projects or commercial applications, Graco's innovative sprayers are set to enhance productivity and finish quality in any painting job.
Top Page Image Contents