TroubleShooting

DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the operator’s authority to operate the equipment.

Most problems have a simple solution. First, check that:

•Power is turned ON for both units

•Both units are plugged in (or batteries are fresh in Nursery Unit and fully charged in Parent Unit)

•Electrical outlet works

•Volume is turned up on Parent Unit

•Parent Unit is in range of the Nursery Unit

No Sound

•Battery dead or weak — replace or use AC adapter.

•AC adapter not properly connected — check the connections.

•Nursery Unit covered or blocked — remove the obstruction.

Weak Sound

•Nursery Unit too far from baby — move closer.

•Large objects blocking the signal — try repositioning Nursery Unit.

•Volume setting too low — turn it up.

Static

•Interference from other electrical equipment — eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights, light dimmers, etc.)

•Parent Unit too far from Nursery Unit — move them closer.

•Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings & buildings. Try moving the Nursery Unit to another part of the room.

•Change channel on Nursery Unit.

Shrill Sound (Feedback)

•Nursery Unit and Parent Unit too close together — move them farther apart.

•Volume set too high — lower the volume.

Parent Unit Will Not Lock on Child Unit

•All of the sound lights are illuminated and the unit beeps — Go to Pairing Parent and Child Unit section.

Pairing Parent Unit and Child Unit.

To ensure privacy, your Parent Unit is paired with your Nursery Unit at the factory. Your Parent Unit will not work with any other Nursery Unit.

If Parent Unit won’t lock onto the Nursery Unit, or you purchased a new Nursery Unit, follow the procedure below to pair the Parent Unit and Nursery Unit. If you purchased a new Parent Unit, skip Step 1. The new Parent Unit is ready to pair with your Nursery Unit.

1. Erase the Pairing from the Parent Unit.

•Turn the Parent Unit off.

•Hold the Volume Down Button on the Parent Unit while pressing the On/Off Button. Continue to hold the Volume Down Button until you hear a single beep and all of the Sound Lights illuminate briefly.

•Release the Volume Down Button.

•Press and hold the Volume Down Button again.

•Within 2 seconds you will hear a beep. Release the Volume Down Button. All of the SoundLights and the red Loss Connection LED will be lit. The Parent Unit is ready to pair with Nursery Unit.

2. Pair the Parent Unit with Nursery.

•Place Nursery Unit in the same room, five (5) feet (1.5 meters) away from the Parent Unit.

•Turn on Nursery Unit using the On/Off Button on the side. The green power light should come on.

•Within a few seconds, the Parent Unit will find the Nursery Unit. The SoundLights will shut off and the Parent Unit will beep. The Parent Unit is now paired with Nursery Unit.

3.Repeat this procedure if you need to pair another Parent Unit with the Nursery Unit.

Nothing happened when I turned on the Nursery Unit. What do I do?

•First try turning the Nursery Unit off, and then on again.

•If the Parent Unit still does not pair with the Nursery Unit, press the Channel Button on the Nursery Unit, then turn the Nursery Unit off, and then on again.

2M20, 2M19 specifications

The Graco 2M19 and 2M20 are advanced airless paint sprayers that are designed for professionals seeking efficiency and precision in their painting projects. These models stand out for their robust build quality, ease of use, and high performance, making them suitable for a variety of applications, from residential to commercial painting.

One of the primary features of the Graco 2M19 and 2M20 is their powerful electric motor. The motors are engineered to deliver consistent pressure, enabling users to achieve a smooth and even finish on surfaces of all types. This powerful motor is capable of handling thicker materials, allowing for versatility in coating applications, including latex and oil-based paints.

Both models are equipped with Graco's innovative ProConnect technology. This feature allows for simple and efficient tip changes in seconds without the need for tools, enhancing productivity on the job. This means that contractors can easily switch between different spray tips, optimizing the sprayer for various tasks, whether it's fine finishing or heavy coatings.

The 2M19 and 2M20 also feature an in-line filter that helps ensure a continuous flow of paint while preventing debris from clogging the system. This filtration system is particularly beneficial in maintaining the quality of the work and reducing downtime for cleaning and maintenance.

An important characteristic of these sprayers is their compact and portable design. Weighing less than many other models in their class, the Graco 2M19 and 2M20 are easy to transport around job sites. Their ergonomic handle and lightweight construction help minimize user fatigue during extended periods of work.

Moreover, both models offer adjustable pressure settings, allowing painters to customize the spray pressure to suit different surfaces and materials. This flexibility ensures optimal coverage and finish, whether working on textured walls, fences, or furniture.

For those who prioritize ease of cleaning, Graco has incorporated a convenient Clean-Out System in the 2M19 and 2M20. This design reduces cleanup time significantly, enabling users to switch colors swiftly or pack up at the end of the day without hassle.

In summary, the Graco 2M19 and 2M20 airless paint sprayers combine advanced technology, user-friendly features, and high versatility. With their reliable performance, durable construction, and innovative features, these sprayers are ideal for professionals looking to enhance their painting efficiency and achieve quality results on every project.

Graco 2M20, 2M19 warranty TroubleShooting

Models: 2M20 2M19