Installation

General Information

DThe typical installation shown in Fig. 2 is only a guide for selecting and installing system compo- nents. Contact your Graco distributor for assistance in planning a system to suit your needs.

DAlways use Genuine Graco Parts and Accessories. Refer to Product Data Sheet 305646.

DReference numbers and letters in parentheses refer to the callouts in the figures and the parts lists on pages 25–24.

DLift the pump by grasping the outlet manifold (1) securely. See Fig. 3 on page 8.

WARNING

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or

swallowed.

1.Read TOXIC FLUID HAZARD on page 4.

2.Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manu- als. Read the fluid and solvent manufacturer’s warnings.

Tightening Screws Before First Use

Before using the pump for the first time, check and retorque all external fasteners. See Torque Se- quence, page 28. After the first day of operation, retorque the fasteners. Although pump use varies, a general guideline is to retorque fasteners every two months.

Grounding

WARNING

FIRE AND EXPLOSION HAZARD This pump must be grounded. Before operating the pump, ground the system as explained below. Also, read the sec- tion FIRE AND EXPLOSION HAZARD, on page 4.

To reduce the risk of static sparking, ground the pump and all other equipment used or located in the pumping area. Check your local electrical code for detailed grounding instructions for your area and type of equip- ment. Ground all of this equipment:

DPump: Connect a ground wire and clamp as shown in Fig. 1. Loosen the grounding screw (W). Insert one end of a 12 ga (1.5 mm@) minimum ground wire

(Y) behind the grounding screw and tighten the screw securely. Connect the clamp end of the ground wire to a true earth ground. Order Part No. 222011 Ground Wire and Clamp.

Y

W

02646B

Fig. 1

DAir and fluid hoses: Use only grounded hoses with a maximum of 500 ft (150 m) combined hose length to ensure grounding continuity.

DAir compressor: Follow the manufacturer’s recom- mendations.

DAll solvent pails used when flushing: Follow the local code. Use only metal pails, which are conduc- tive. Do not place the pail on a non-conductive surface, such as paper or cardboard, which inter- rupts the grounding continuity.

DFluid supply container: Follow the local code.

308441 5

Page 4 Page 6
Page 5
Image 5
Graco 308441ZAD Installation, General Information, Tightening Screws Before First Use, Grounding, Toxic Fluid Hazard
Page 4 Page 6

308441ZAD specifications

The Graco 308441ZAD is a versatile and innovative child car seat designed to deliver top-notch safety and comfort for your little ones during travel. This car seat is engineered with advanced features and technologies that make it a popular choice among parents looking for reliability and convenience in child transportation.

One of the standout features of the Graco 308441ZAD is its 3-in-1 design, which provides adaptability as your child grows. It can be used as an infant car seat, a convertible car seat for toddlers, and finally as a booster seat. This remarkable versatility allows parents to use the same car seat from infancy through early childhood, making it a cost-effective solution for families.

Safety is paramount in the design of the Graco 308441ZAD. It comes equipped with an adjustable headrest and side impact protection, ensuring that children are well-protected in the event of a collision. The car seat meets or exceeds all U.S. safety standards and is rigorously tested for safety and durability, giving parents peace of mind during every ride.

The car seat features a Simply Safe Adjust Harness System, which allows parents to adjust the harness and headrest together in one easy step. This feature not only makes it user-friendly but also ensures that children are securely strapped in as they grow. The Graco 308441ZAD also boasts an integrated cup holder, providing easy access to drinks and snacks, and keeping your car organized and tidy.

Another impressive characteristic of the Graco 308441ZAD is its installation system, which utilizes the LATCH (Lower Anchors and Tethers for Children) system, enabling quick and secure installation in most vehicles. Additionally, the car seat is designed with machine-washable covers, ensuring that spills and messes can be easily cleaned up, maintaining the seat’s appearance and hygiene.

In terms of comfort, the Graco 308441ZAD features plush, padded seats and multiple recline positions, allowing children to find a comfortable resting position for longer journeys. With several color options available, this car seat can seamlessly fit into any vehicle interior while providing peace of mind initially intended for your child's safety and well-being.

In summary, the Graco 308441ZAD is a reliable and user-friendly car seat that combines safety, comfort, and versatility, making it an excellent choice for parents who prioritize their child’s safety while traveling.
Top Page Image Contents