Accessories, Spray Gun Air Regulator Assembly

Accessories

For use on a spray gun with a 1/4–18 npsm air fitting. Includes the following parts:

NOTE: Installing the gun air inlet regulator adds a pressure drop that could limit the air cap pressure.

4	01730

1/4 npt(f), zinc-plated brass

NOTE: Installing the coupler adds a pressure drop that could limit the air cap pressure.

1/4 npt(m), zinc-plated steel

Replaces nipple 162453, item 1, at left

0697

Box of 20 special blend polyethylene liners.

Use to line cup for easy clean-up. Graco Standard Warranty

308791 11

Image 11

Contents

Double Air Regulator Instructions - Parts ListImportant Safety Instructions Single Air Regulator Part No. 239802, 239803, and 245181 Install the Gun on the Cup Table of ContentsSetup Install the Elbow Fitting and Tubing 7623A 3087917611A 7612A Operation Setting the Cup Air PressureSetting the Gun Air Pressure Pressure Relief Procedure Optional Gun Air Regulator Remove the Cup Lid Maintenance1. Follow the Pressure Relief Procedure Warning on page Disconnect the Gun and Air Regulator from the Cup See parts list above Use Only Genuine Graco Parts and AccessoriesSingle Air Regulator Assembly Part No. 235375, Series B See parts list at right Double Air Regulator Pressure Cup Kit Double Air Regulator Assembly Part No. 235376, Series BSee parts list below See parts list, page Part No. 236142, Series B Remote Air Regulator AssemblyRemote Single Air Regulator Pressure Cup Kit Single Air Regulator Pressure Cup Kit, Part No. 239802 and Technical DataWeight Weight without gun 150 psi 10 bar Maximum Inlet Pressure AccessoriesSpray Gun Air Regulator Assembly 100 psi 7 bar Maximum Outlet Pressure Graco reserves the right to make changes at any time without notice Graco Standard WarrantyGraco Information FOR GRACO CANADA CUSTOMERS