Grounding
Check your local electrical code and proportioner man- ual for detailed grounding instructions.
Ground the spray gun through connection to a
Piston Safety Lock
Engage piston safety lock whenever you stop spray- ing, to avoid accidental triggering.
To engage piston safety lock: push knob in and turn clockwise. If engaged, gun will not actuate.
Engaged | TI2409A |
To disengage piston safety lock: push knob in and turn counterclockwise until it pops out. There will be a gap between knob and gun body.
Disengaged
TI2410A
Grounding
Turning Air Cap
1. Follow Pressure Relief Procedure, page 15.
2. Close fluid valves A and B before turning air cap
(C).
C
B
TI2421A
A
Loss of Air Pressure
In event of loss of air pressure, gun will continue to spray. To shut off gun, do one of the following:
•Push in piston safety lock, see page 10.
•Close fluid valves A and B.
C
B
TI2421A
A
310649C | 7 |
