Installation
Installation
Mounting gun to rod
1. To mount the gun on a 1/2 in. diameter rod, insert
the bar (A) through the hole in the gun body as shown.
ti4750a
2. Secure the gun to the bar by tightening 1/4 in. - 20 mounting screws.
Mounting gun to stationary support or robot arm
To mount gun to stationary support or robot arm, see mounting hole dimensions page 20.
Two .128 in. alignment pin holes
Two 1/4 - 20 unc holes
ti4751b
310649C | 9 |
