Parts

Parts

255478, Dosing Valve for XM Plural-Component Sprayers

13 15

1.Apply pipe sealant to non-swiveling pipe threads.

8 19

8 10

31 32

1136

12 33

24 10

7 6

17 8

6 4

16 4

25 9

29 12

2.Apply lubricant to threads, o-rings, and seals.

3	Apply blue thread lock. Thread to bottom.
4	Torque to 5-7 ft-lbs (7-9 N•m).
5	Torque to 30-40 ft-lbs (41-54 N•m).
6	Tighten packing nut 1/4 turn after nut bottoms out;
	145-155 in./lbs (16-18 N•m). Check packing nut tightness
	about once a month. Keep packing nut filled with TSL.
7	Lubricate and press piston evenly into cylinder.
8	Clean ball housing (10) and packing cavity before
	reinstalling packings (17, 18, 19). Lubricate packings and
	install with lips facing down away from packing nut (7) in
	order shown.

27 5

r_313259_313342_3

9Replace o-rings (25) when seat housing (26) is removed.

10Inspect reversible seat for damage. If one side is worn, reverse seat.

11Use o-ring (36) if replacing circulation valve 255278.

12Use if recirculation valve is not used.

313342D