Setup

15.Turn prime valve horizontal. Disengage trigger lock.

ti24646a

16.Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun and flush until clean.

17.Turn ON/OFF switch to OFF position.

18.Engage trigger lock.

19.After flushing storage fluid out of the sprayer empty pail. Replace fluid intake with drain tube in grounded metal pail partially filled with flushing fluid. Use water to flush water-based paint or mineral spirits to flush oil-based paint.

20.Turn ON/OFF switch to ON position.

21.Turn prime valve horizontal. Disengage trigger lock.

22.Hold a metal part of the gun firmly to a grounded metal pail. Trigger gun and flush for one minute.

23.Turn ON/OFF switch to OFF position.

24.Engage trigger lock.

25.Sprayer is now ready to start up and spray.

18

334466A

Page 18
Image 18
Graco 334466A important safety instructions Turn prime valve horizontal. Disengage trigger lock