Startup

6.Turn prime valve horizontal. Disengage trigger lock.

ti24646a

7.Hold gun against grounded metal waste pail. Trigger gun until paint appears.

1 m

ti24647a

20

8.Move gun to paint pail and trigger for 20 seconds. Release trigger and allow sprayer to build pressure. Engage trigger lock.

20 s

ti24649a

High-pressure spray is able to inject toxins into the body and cause serious bodily injury. Do not stop leaks with hand or rag.

9.Inspect for leaks. If leaks occur, perform Pressure Relief Procedure, page 13, then tighten all fittings and repeat Startup procedure. If there are no leaks continue with the next step.

334466A

Page 20
Image 20
Graco 334466A important safety instructions 20 s