Technical Data
Inlet/Outlet Sizes
Fluid inlet - Polypropylene |
| 3 in. ANSI/DIN flange | ||
Fluid inlet - Aluminum | 3 | |||
Fluid inlet - Stainless Steel |
| 3 | ||
|
|
| ||
Air Inlet - all pumps |
| 3/4 in. npt(f) | ||
|
|
|
| |
Wetted parts |
|
|
| |
All pumps | Materials chosen for seat, ball, and diaphragm options, | |||
|
| plus the pump’s material of construction - aluminum, poly- | ||
|
| propylene, or stainless steel. Aluminum pumps also have | ||
|
|
| ||
|
|
|
| |
|
|
|
| |
Polypropylene |
| stainless steel, polypropylene | ||
|
|
| ||
Aluminum |
| aluminum, coated carbon steel | ||
|
|
| ||
Stainless Steel |
| stainless steel, polypropylene or aluminum | ||
|
|
| (as used in center section) | |
|
|
|
| |
Weight |
|
|
| |
Polypropylene | 200 lb |
| 91 kg | |
|
|
|
| |
Aluminum | 150 lb |
| 68 kg | |
|
|
|
| |
Stainless Steel | 255 lb |
| 116 kg | |
|
|
|
| |
Notes |
|
|
| |
* | Maximum values with water as media at ambient temperature. Water level is approximately 3 feet above pump | |||
| inlet. |
|
|
|
** Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pres- sure, and fluid type.
*** Sound power measured per
Loctite® is a registered trademark of the Loctite Corporation.
3A0410D | 21 |
