Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

•Do not leave the work area while equipment is energized or under pressure.

•Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety hazards.

•Make sure all equipment is rated and approved for the environment in which you are using it.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

THERMAL EXPANSION HAZARD

Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure due to the thermal expansion. Over-pressurization can result in equipment rupture and serious injury.

• Open a valve to relieve the fluid expansion during heating.

• Replace hoses proactively at regular intervals based on your operating conditions.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material sup- plier for compatibility.

PLASTIC PARTS CLEANING SOLVENT HAZARD

Many solvents can degrade plastic parts and cause them to fail, which could cause serious injury or property damage.

•Use only compatible water-based solvents to clean plastic structural or pressure-containing parts.

•See Technical Data in this and all other equipment instruction manuals. Read fluid and solvent manufacturer’s MSDSs and recommendations.

6

3A0410D

Page 5 Page 7
Page 6
Image 6
Graco 3A0410D important safety instructions Equipment Misuse Hazard
Page 5 Page 7

3A0410D specifications

The Graco 3A0410D is a highly versatile airless paint sprayer that stands out for its durability, efficiency, and ease of use, making it an ideal choice for both professional contractors and DIY enthusiasts. This sprayer is designed to deliver a high-quality finish, allowing users to tackle a wide range of painting projects, from small residential tasks to large industrial jobs.

One of the main features of the Graco 3A0410D is its powerful electric motor, which is capable of producing pressures up to 3,000 PSI. This high pressure enables the sprayer to handle thick coatings and achieve excellent coverage, ensuring that users can complete their projects quickly and efficiently. The robust design is complemented by a durable frame and components, allowing it to withstand the rigors of regular use while maintaining performance.

The 3A0410D incorporates Graco’s ProConnect technology, which simplifies the replacement of the pump without the need for tools. This feature not only saves time but also minimizes downtime on job sites, allowing users to keep their projects on schedule. The unit also features an adjustable spray pressure, giving users the flexibility to adapt to various painting materials and surfaces, thus ensuring optimal results in every application.

Another notable characteristic is the Graco's SmartControl technology, which ensures a consistent spray pattern and pressure regardless of the surface area being covered or the material being used. This technology helps reduce overspray, allowing for more precise application and less waste.

The Graco 3A0410D is designed for easy maneuverability, featuring a lightweight and compact design, along with rugged wheels for easier transport over different terrains. Additionally, it is compatible with a wide range of accessories, including different nozzle sizes and filters, facilitating its use across various painting tasks.

In summary, the Graco 3A0410D airless paint sprayer is a reliable and efficient tool for anyone looking to achieve professional quality finishes. With its powerful performance, user-friendly features, and advanced technologies, it is an excellent investment for both occasional and frequent users, ensuring that any painting project can be completed with precision and ease.
Top Page Image Contents