Graco 3A0732J important safety instructions Technical Data

Technical Data

Technical Data

Maximum fluid working pressure

15:1 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 psi (10.3 MPa, 103 bar) 30:1 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (20.7 MPa, 207 bar)

Maximum air inlet pressure . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7.0 bar)

Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15:1 or 30:1 (see Models, page 3)

Maximum fluid temperature. . . . . . . . . . . . . . . . . . . 160°F, 71°C

Ambient air temperature range . . . . . . . . . . . . . . . . 35-120°F, 2-49°C Package air inlet size . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f) Package fluid outlet size . . . . . . . . . . . . . . . . . . . . . 1/4 npsm(m) Maximum motor speed . . . . . . . . . . . . . . . . . . . . . . 240 cycles per minute (Do not exceed maximum recommended speed of

fluid pump, to prevent premature pump wear.)

Maximum spray tip orifice size . . . . . . . . . . . . . . . . .019 in. (0.483 mm)

Sound data 24G693 Air Motor

Sound power* . . . . . . . . . . . . . . . . . . . . . . .

Sound pressure**. . . . . . . . . . . . . . . . . . . . .

24G694 Air Motor

Sound power* . . . . . . . . . . . . . . . . . . . . . . .

Sound pressure**. . . . . . . . . . . . . . . . . . . . .

Wetted parts

Plated steel pumps . . . . . . . . . . . . . . . . . . . . . .

Stainless steel pumps . . . . . . . . . . . . . . . . . . . .

Spray guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83.2dBA

76.5dBA

84.5dBA

77.9dBA

Stainless steel, nickel plated carbon steel, tungsten carbide, ptfe, acetal, leather, ultra-high molecular weight polyethylene

Stainless steel, tungsten carbide, ptfe, acetal, leather, ultra-high molecular weight polyethylene See manual 3A0149 (G15 and G40 AA guns) or 311254 (Silver Plus airless gun)

Fluid hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nylon, plated or stainless steel

Suction assembly . . . . . . . . . . . . . . . . . . . . . . . . Stainless steel, nylon, acetal, fluoroelastomer, polyethylene

*Sound power at 70 psi (0.48 MPa, 4.8 bar), 80 cpm. Sound power measured per ISO-9614-2.

**Sound pressure was tested 3.28 feet (1 m) from equipment.

3A0732J 41