To Assemble the Mix ’N Move® Toy Gym (on certain models)

Before assembling, check that you have all the parts listed below:

Mix ’N Move® toys (styles may vary)

Mounting

post

and cap (2 each)

Bar and beads

Step 1.

To mount beads on bar: flatten ring at one end of bar as shown and push through hole in center of each bead.

Step 2.

Shorter teeth

Place ring on top of

on bottom

 

a mounting post.

 

Shorter teeth must

 

be on the bottom, as

 

shown. Top of mounting

 

post will be even with top

 

of ring. Snap cap into place

 

inside mounting post and turn

 

it up to one half turn until it

 

locks in place. Repeat with

 

the other ring, post and cap.

 

Step 3.

Mount posts onto front corners of activity center tray as shown until they snap securely into place. Center of bar should curve away from the seat, not toward it.

Step 4.

Insert the two prongs on a toy base into a cap at the notches.

Step 5.

Turn toy base one quarter turn until you feel the toy snap into place. Check that toy is firmly inserted by pulling on the toy.

Toy is removable (turn it the other way with a little pressure) so that you can replace it with other toys when desired (sold separately—see the enclosed leaflet).

To Attach the Spoiler (on certain models)

Line up the pegs on the bottom of the spoiler with the two holes at the back of the activity center and push the spoiler in until it snaps in place. It will not be removable.

Do not allow spoiler to block seat by inserting it backwards.

Avoid falls and other hazards. Never allow unit to be pushed while child is in product.

11

12