To Use the Carrier with Baby Facing Out
Do not use carrier with baby facing outward or on back until baby can easily support head.
The main difference in this position is that the top tab threads differently through the top ring to keep the top of the carrier folded down. See illustration at right.
Follow steps
Step 5.
Thread the bottom tabs through the bottom rings, buckle them (listen for a click) and pull the straps snug.
Step 6.
Fold the top of the carrier down as shown.
Thread both top tabs through the narrow top rings from the outside in. Fasten the snaps securely.
Top tab now | Top folds |
snaps to the | down |
inside |
|
Legs go | Arms go through | |
through openings | ||
openings | ||
below buckles | ||
|
Make sure:
! top is folded over,
!tabs are snapped to the
!inside (this is different than
! when baby faces you), and
! baby’s arms go through ! the openings, NOT over ! the top of the carrier.
Step 7.
Adjust baby’s pouch if needed
by tightening or loosening the strap underneath the crotch area to raise or lower your baby.
To Use the Outer Cover (on certain models)
Step 1.
Fasten the snaps at the very bottom of the cover to the outermost snap on the waist support. For a smaller baby, fasten the next set of snaps as well.
Step 2.
Wrap the cover up over your baby. Thread the tabs at the top of the cover through the top rings of the carrier and snap it back onto itself on both sides.
Step 3.
Bring the upper hood part of the cover up and over your baby’s head.
10
