d. Connect the lap belt to the shoulder belt by placing the locking clip on the belts about ½ inch from the latchplate as shown ￿ and ￿.

e. Re-buckle the belt and pull hard on the lap belt to be sure it does not move.

f. Repeat this procedure if the lap belt is loose or lengthens when pulled.

￿

Locking clip goes here,

1/2 inch from the buckle

13. If you are using the base, make sure that there

￿

is nothing on top of or in the base that may interfere

with attachment of the safety seat. Then push the

 

safety seat down into the base and make sure that

 

you hear a “click” ￿. Pull up on the safety seat to

 

be sure it is latched securely into the base.

 

If the safety seat does not securely latch into the base, the safety seat provides NO protection for your child. DO NOT use the safety seat/base if the safety seat does not securely latch into

the base.

49