![](/images/backgrounds/198379/198379-7247x1.png)
Models with | |
6. Buckle the harness to the latch between your |
|
child’s legs. Make sure that you hear a “click.” |
|
If the harness straps are not buckled, the safety |
|
seat provides NO protection for your child. DO |
|
NOT use the safety seat if the harness does not |
|
latch in place. Call Graco at |
|
7. From the back of the safety seat, pull the strap | |
through the harness tightener to tighten the straps as |
|
shown . Make sure that both straps are flat and tight |
|
on your child’s shoulders. |
|
8.Slide the strap back into the harness clip . This is
easier to do when the harness clip is near the buckle.
9. Position the harness clip at the middle of the child’s | ||
chest, level with the armpits and away from the child’s | ||
| ||
neck . |
| |
10. Check that the harness straps are not twisted. Also, |
| |
check that the harness is snug. You should not be able |
| |
to insert more than one finger between the harness and |
| |
your child’s shoulder . |
|
39