10.0 Using Child Restraint WITH Built-in Harness

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS

FOR YOUR CHILD INCREASES THE RISK OF SERIOUS

INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

1.Loosen the harness straps by lifting the harness adjuster lever ™ at front of seat near the adjustment strap and pulling the straps toward you š.

2.Open harness clip ›.

š

™

›

29

Page 29
Image 29
Graco 70 owner manual Using Child Restraint with Built-in Harness