![](/images/new-backgrounds/1317661/31766171x1.webp)
6.NEVER put two LATCH connectors on one vehicle LATCH anchor unless specifically allowed by the vehicle manufacturer .
7.All LATCH seating positions have tether anchors. Secure the top of the seat using the tether strap. See Section 21.0 Using the Tether, page 60.
8.Safety Check for Secure Installation
Perform this test every time you drive with your child.
Twist and pull child restraint forward and to both sides to make sure the LATCH belt does not lengthen or loosen and the child restraint does not easily move. The child restraint should not move side to side or forward more than 1 inch (2.5 cm). .If child restraint is loose or not secure, repeat procedure OR find another location for the child restraint, see Section 8.0 Choosing an Appropriate Vehicle Seat Location, p. 19.
36