11.3 With LATCH
Use vehicle belt (not LATCH connectors) for |
|
| |
installations with children weighing more than |
|
| |
48 pounds (21.7 kg). NOTE: Some vehicle |
|
| |
manufacturers have lower maximum weight |
|
| |
ratings for LATCH anchors, so you must |
|
| |
consult your vehicle owner’s manual or call the |
| | |
vehicle manufacturer to confirm the limits on your |
| ||
vehicle’s LATCH anchors. |
|
| |
1. Unhook LATCH from storage bars on the |
|
| |
sides of the seat. For ease of installation, extend |
|
| |
LATCH to its maximum length. |
|
| |
2. Place the child restraint firmly against the back | |
| |
of a |
| ||
3. Hook LATCH Connectors to vehicle lower |
|
| |
anchors . Pull firmly on Connectors |
|
| |
to be sure they are attached. Belt must |
|
| |
lay flat and not be twisted. | | | |
4. Tighten LATCH by pushing down hard on | |||
| |||
child restraint and pulling the adjustment belt . |
|
| |
5. If you need to remove LATCH to readjust, |
|
| |
push button on LATCH buckle to loosen strap. |
|
| |
35 |
|
|
