3.5 Attaching Canopy (on certain models)
1.Infant restraint comes with four (two on certain models) identical canopy support parts.
Thread one canopy support completely through one sewn tunnel ✁.
2.Slide straight end of a second
support into the straight end of the first support ✂.
✁
✂
3.On models with four canopy supports, repeat
steps one and two for the other canopy tunnel. The canopy should appear as shown ✃.
4.Attach canopy in the areas between the
infant restraint and the handle base ✄.
✃
✄
| To remove canopy: | ☎ |
Pull the canopy fabric back. | |
With both thumbs on the |
|
center of the canopy bow, |
|
wiggle back and forth while |
|
pulling out on the two parts |
|
of the canopy bow ☎. |
|
14