3.5 Attaching Canopy (on certain models)

1.Infant restraint comes with four (two on certain models) identical canopy support parts.

Thread one canopy support completely through one sewn tunnel .

2.Slide straight end of a second

support into the straight end of the first support .

3.On models with four canopy supports, repeat

steps one and two for the other canopy tunnel. The canopy should appear as shown .

4.Attach canopy in the areas between the

infant restraint and the handle base .

To remove canopy:

Pull the canopy fabric back.

With both thumbs on the center of the canopy bow, wiggle back and forth while pulling out on the two parts of the canopy bow .

14

Page 46
Image 46
Graco 7444 manual Attaching Canopy on certain models, To remove canopy, Pull the canopy fabric back